1. The கொக்கி used in the lifting mechanism driven by manpower is tested with 1.5 times the rated load as the inspection load.
2. The கொக்கி used for the power-driven lifting mechanism shall be tested with 2 times the rated load as the inspection load.
3. பிறகுகொக்கிஆய்வு சுமையிலிருந்து அகற்றப்பட்டது, வெளிப்படையான குறைபாடுகள் அல்லது சிதைவுகள் இருக்கக்கூடாது, மேலும் தொடக்க பட்டத்தின் அதிகரிப்பு அசல் அளவின் 0.25% ஐ விட அதிகமாக இருக்கக்கூடாது.
4. க்கானகொக்கிs that have passed the inspection, a mark should be printed in the low-stress area of the கொக்கி, including the rated lifting weight, factory mark or factory name, inspection mark, production number, etc.
ஸ்கிராப் தரநிலைகள்கொக்கிs
திகொக்கிபின்வரும் சூழ்நிலைகளில் ஒன்று ஏற்படும் போது அகற்றப்பட வேண்டும்:
â 'விரிசல்;
section anger ஆபத்தான பிரிவு உடைகள் அசல் அளவின் 10% ஐ அடைகிறது;
size ‘¢ தொடக்க அளவு அசல் அளவுடன் ஒப்பிடும்போது 15% அதிகரித்துள்ளது;
④The torsion deformation of the கொக்கி body exceeds 10°;
⑤The dangerous section of the கொக்கி or the neck of the கொக்கி is plastically deformed;
⑥The கொக்கி thread is corroded;
⑦When the wear of the கொக்கி bushing reaches 50% of the original size, the bushing should be replaced;
§’§ துண்டின் மாண்ட்ரெல் போதுகொக்கிஅசல் அளவின் 5% வரை அணியப்படுகிறது, மாண்ட்ரெல் மாற்றப்பட வேண்டும்.